BS01帶狀熱通量傳感器產品介紹
BS01帶狀熱通量傳感器是一款專為精準測量表面熱流密度而設計的高性能傳感設備。該產品采用柔性帶狀結構，可貼合多種異形表面，適用于工業設備監測、建筑節能分析、環境研究及新能源開發等領域，為用戶提供可靠的熱傳遞過程動態數據。
產品采用多層復合傳感技術，通過特殊工藝將敏感元件與柔性基底結合，確保在復雜工況下保持穩定的信號輸出。其超薄帶狀外形設計（厚度小于1.5mm）有效降低對被測物體原有熱場分布的干擾，配合自適應接觸技術，可實現不同材質表面的快速安裝。內置溫度補償模塊可自動修正環境溫度波動帶來的測量偏差，長期工作條件下仍能保持±3%以內的測量精度。
在工業領域，該傳感器可實時監測鍋爐管道、熱交換器、電子元件等設備的熱流分布，為能效優化提供數據支持；在建筑領域，可嵌入墻體、屋頂等圍護結構，精準分析建筑傳熱系數；在新能源領域，可應用于太陽能集熱系統、地源熱泵等場景，助力清潔能源設備的熱管理優化。產品工作溫度范圍覆蓋-40℃至+150℃，防護等級滿足常規工業環境需求，特殊定制版本可適應更高溫度場景。
BS01傳感器具備良好的環境適應性，其耐候性表面材料可抵御潮濕、粉塵及弱腐蝕性介質的侵蝕。配備標準化信號輸出接口，兼容主流數據采集系統，支持實時監測與歷史數據追溯功能。產品出廠前經過嚴格的質量檢測流程，確保每支傳感器達到設計性能指標，為用戶提供長達5年的穩定服務周期。
BS01 Strip-Type Heat Flux Sensor Product Introduction
The BS01 strip-type heat flux sensor is a high-performance sensing device specifically designed for accurate measurement of surface heat flux density. Featuring a flexible ribbon structure, it conforms to various irregular surfaces, making it suitable for industrial equipment monitoring, building energy efficiency analysis, environmental research, and renewable energy development applications. This product delivers reliable dynamic data for thermal transfer processes across multiple scenarios.
Utilizing multi-layer composite sensing technology, the sensor integrates sensitive components with a flexible substrate through specialized manufacturing processes, ensuring stable signal output under complex working conditions. Its ultra-thin ribbon design (thickness <1.5mm) minimizes interference with the original thermal field distribution of measured objects. The adaptive contact technology enables rapid installation on surfaces of different materials. The built-in temperature compensation module automatically corrects measurement deviations caused by ambient temperature fluctuations, maintaining measurement accuracy within ±3% under prolonged operation conditions.
In industrial applications, the sensor provides real-time monitoring of heat flux distribution in boilers, heat exchangers, and electronic components, supporting energy efficiency optimization. For building applications, it can be embedded in walls and roofs to accurately analyze thermal transmittance coefficients. In renewable energy systems, it facilitates thermal management optimization for solar collectors and ground-source heat pumps. The operational temperature range spans from -40℃ to +150℃, with standard protection levels meeting conventional industrial requirements. Customized versions are available for higher temperature environments.
The BS01 demonstrates excellent environmental adaptability, with weather-resistant surface materials that withstand moisture, dust, and mild corrosive substances. Equipped with standardized signal output interfaces, it seamlessly integrates with mainstream data acquisition systems, supporting both real-time monitoring and historical data analysis. Each unit undergoes rigorous quality control procedures prior to shipment, ensuring compliance with design specifications and providing up to 5 years of stable service life.
