GTC200料位開關
GTC200音叉物位開關產品介紹（中文）
GTC200音叉物位開關是一款通過壓電晶體諧振原理工作的工業級檢測設備，適用于液體、粉末及顆粒狀固體的料位監測。其核心工作原理是通過壓電晶體激發音叉振動，當物料接觸音叉時振動幅度和頻率會因阻尼作用發生顯著變化，內部電子電路會實時檢測這種變化并轉換為開關信號輸出。該產品采用不銹鋼叉體材質和壓鑄鋁合金外殼，提供G1½螺紋或法蘭安裝方式，能適應-20℃至80℃的介質溫度范圍和1MPa的工作壓力環境。產品具有高亮度LED狀態指示燈，可直觀顯示料位狀態，并提供繼電器接點、直流電壓或電流多種輸出方式。特別設計的防粘附結構使其在粉粒體介質中表現穩定，安裝時建議采用叉端向下垂直或傾斜方式以避免物料堆積影響檢測精度。9
GTC200 Vibrating Fork Level Switch Product Introduction (English)
The GTC200 vibrating fork level switch utilizes piezoelectric crystal resonance technology to reliably detect liquid, powder and granular solid levels in industrial processes. Its working mechanism involves continuous fork vibration at 300±50Hz frequency through piezoelectric excitation - when material contacts the fork tines, amplitude reduction and phase shift trigger the integrated electronics to generate switching signals. Constructed with 1Cr18Ni9Ti stainless steel fork and die-cast aluminum housing, it offers IP65 protection and supports both G1½ threaded and flanged mounting options. The device operates within -20℃ to 80℃ material temperature range and 1MPa pressure conditions, featuring dual-color LEDs for visual status indication and configurable output options including relay contacts (8A/250VAC), 0-5VDC or 0-10mA current signals. The optimized fork geometry demonstrates strong anti-clogging performance for cohesive materials, with vertical downward mounting recommended for sticky substances. No mechanical adjustments or calibration are required during operation, ensuring maintenance-free performance in bulk solids storage applications.9
產品特點與安裝注意事項（中文）
該設備采用全封閉式設計，振動部件與電子線路完全隔離，能夠長期穩定運行于粉塵、潮濕等惡劣工業環境。音叉部分經過特殊頻率調校，對低密度粉末（≥0.1g/cm³）和小顆粒固體（≤10mm）具有可靠檢測能力。電氣接口采用M20×1.5電纜接頭，支持AC220V或DC24V供電，功耗低于2W。安裝時需注意避免物料直接沖擊音叉，對于高粘度介質建議垂直安裝并定期清理叉體附著物。產品內置3-6秒的動作延時功能可有效防止物料流動造成的誤觸發，適用于料倉的高低位報警、輸送管道的空流監測等多種工業場景。9
Technical Features & Applications (English)
With completely sealed vibration assembly and isolated electronics compartment, this level switch maintains consistent performance in dusty, humid or corrosive environments. The precision-tuned fork demonstrates high sensitivity for low-density powders (≥0.1g/cm³) and small particle solids (≤10mm). Standard configuration includes M20×1.5 cable gland, accepting either AC220V or DC24V power supply with <2W consumption. Installation requires avoiding direct material impact on fork tines, with periodic cleaning recommended for adhesive substances. Built-in 3-6 second response delay effectively prevents false triggering during material flow, making it suitable for diverse applications including silo high/low level alarms, conveyor belt feed monitoring, and pump dry-run protection in chemical, food processing and bulk material handling industries. The fail-safe design incorporates automatic fault detection with LED indication for operational reliability.9
GTC200料位開關
技術特點
性強:應用于各種場合，飛灰、顆粒、粉體液體枯胭、導電和非導電物料。
抗粘附電路:來用抗粘附電路可以物料的粘附而產生虛假信號。
探頭可折式:探頭與控制器可分離，無電纜連接，安裝拆除不影洞進出科。
探頭耐高低溫:探頭適臺184260C的工作環境，還提供國資高溫探頭。
輸出實量大:采用容盤為10A .11的腿電器敏點輸出，并有狀態燈顯示工作狀態，0~ 30動科時功能貼片技術:使電路線路抗壙性更強，電路參數更穩定更可靠，
浪壓技術:提高了探頭的使用壓力，延長的使用壽命
技術參數
1.電源：220VAC/110VAC/24VAC/24VDC
2.觸點容量：250VAC/10A SPDT（單刀雙擲）
3.功率：4W
4.葉片轉速：1RPM（轉/分）
5.力矩：1.0kg×cm
6.物料比重：≥0.5g/cm3
7.工作溫度：-10℃-80℃（zui高可達400℃）
8.絕緣電阻：≥100MΩ
9.介電強度：1500V*1min
GTC200料位開關
塑殼配電保護CDM6S-63M/4300B 32A
塑殼斷路器CDM3-400H/4200B 200A
塑殼配電保護CDM3-250S/4200A 250A
框架斷路器CDW3 1600N 400A3P固定水平AC380V欠AC230V
框架斷路器CDW6I-3200N 2500A抽水AC380V無欠壓
上一篇 BS-VIB111料位開關 http://www.sanxiongzg.com/product/d167172.html
|
